Epolite FH-5313 Epoxies

Epolite FH-5313 Epoxies

Epolite FH-5313 Epoxies

Formulated to Fuller Epolite FH-5313 specifications.
This adhesive is a two-part 100% solid, room temperature curing, epoxy resin that can be mixed with either an optical hardener or an electrical hardener depending on your application.
Both systems are designed for continuous operation at high temperatures up to 200°F and are available in pre-measured kits.
OPTICAL GRADE EPOXY CANNOT BE SHIPPED INTERNATIONALLY.
EPOXY SDS/DATA SHEETS
OPTICAL GRADE EPOXY
When Mixed With Optical Hardener
BENEFITS
  • Low outgassing
  • Space qualified
  • High transmission (Refractive Index = 1.66)
  • Excellent chemical resistance
  • High mechanical strength
  • Thermally stable
  • Slow curing, low viscosity
  • Meets General Electric (GE) Specification number M-2820-CR
COMMON USES
  • Ideal for bonding a variety of optical substrates.
  • Potting and encapsulation
APPLICATIONS
  • Space borne systems
  • Prism assemblies
  • Precision optical alignment
  • Image quality optical assemblies
ELECTRICAL GRADE EPOXY
When Mixed With Electrical Hardener
BENEFITS
  • Low outgassing
  • Space qualified
  • Excellent chemical resistance
  • High mechanical strength
  • Thermally stable
  • Beneficial electrical properties
  • Slow curing, low viscosity
  • Meets General Electric (GE) Specification number M-2820-CR
COMMON USES
  • Ideal for bonding a variety of substrates such as metal, glass, and plastic.
  • Potting and encapsulation
  • Mounting electrical testing components
APPLICATIONS
  • Space borne systems
  • Potting and encapsulation
  • Nuclear/particle physics testing
  • High energy particle accelerators

General Properties

Property Value Test Method
Specific Gravity1.17ASTM-D-792-00
Hardness, Shore D81ASTM-D-2240-04e1
Tensile Strength7,940 psiASTM-D-683-03
Shear Strength782 psiASTM-D-1002-01
Compressive Strength15,440 psiASTM-D-695-02a
Flexural Strength13,860 psiASTM-D-790-03
Coefficient of Linear Thermal Expansion93.5 ppm/°CASTM-E-831-03
Mixed Viscosity1,970 cPMIL-STD-883E
Pot Life, minutes at 77°F30ERF 13-70
Cure Schedule, hours at 77°F12
Cure Schedule, hours at 150°F1
Mix Ratio by Weight (A:B)100:15

Electrical Properties

Property Value Test Method
Dielectric Strength2,128 volts/milASTM-D-149-97a
Dielectric Constant, 100 Hz4.06ASTM-D-150-98
Dissipation Factor, 100 Hz0.001ASTM-D-150-98
Volume Resistivity, ohm-cm8.4 × 1014ASTM-D-257-99

Chemical Resistance

Chemical Weight Change Thickness Change Test Method
Isopropyl Alcohol0.15%0.902%ASTM-D-543-95
Jet A0.055%0.519%ASTM-D-543-95

Outgassing Properties

Property Value Test Method
Total Mass Loss0.56%ASTM-E-595-03e2
CVCM<0.01%ASTM-E-595-03e2
Water Vapor Regain0.29%ASTM-E-595-03e2

Showing all 8 results

    PART NO.
    DESCRIPTION
    1 - 5 pcs.
    6 - 10 pcs.
    > 10 pcs.
    Stock Status

    FH-5313A-A-PAK

    H.B. Fuller 5313A epoxy/DEH hardener in a 6 Gram A-PAK

    $44.00
    $42.00
    $40.00
    In Stock

    FH-5313A-A-PAK-O

    H.B. Fuller 5313A epoxy/Optical Hardener 11409 in a 6 Gram A-PAK

    $44.00
    $42.00
    $40.00
    In Stock

    FH-5313A-KIT-128

    H.B. Fuller 5313A epoxy kit, 128 oz. resin/16 oz. DEH hardener

    $3,383.00
    $3,214.00
    $3,045.00
    In Stock

    FH-5313A-KIT-128-O

    H.B. Fuller 5313A epoxy kit, 128 oz. resin/16 oz. Optical Hardener 11409

    $3,383.00
    $3,214.00
    $3,045.00
    In Stock

    FH-5313A-KIT-16

    H.B. Fuller 5313A epoxy kit, 16 oz. resin/2 oz. DEH hardener

    $678.00
    $644.00
    $610.00
    In Stock

    FH-5313A-KIT-16-O

    H.B. Fuller 5313A epoxy kit, 16 oz. resin/2 oz. Optical Hardener 11409

    $678.00
    $644.00
    $610.00
    In Stock

    FH-5313A-KIT-64

    H.B. Fuller 5313A epoxy kit, 64 oz. resin/8 oz. DEH hardener

    $2,057.00
    $1,954.00
    $1,851.00
    In Stock

    FH-5313A-KIT-64-O

    H.B. Fuller 5313A epoxy kit, 64 oz. resin/8 oz. Optical Hardener 11409

    $2,057.00
    $1,954.00
    $1,851.00
    In Stock